Gain extra benefits by becoming a Supporting Member Click here find out how!

Classic Performance Products Nu-Relics Power Windows
American Auto Wire Hellwig Products IncPerformance Rod & Custom
Danchuk Catalog



Username Post: Missing vacuum hose on EGR Solenoid?        (Topic#375785)
Caswell 
Newbie
Posts: 2

Reg: 10-01-24
10-02-24 04:25 AM - Post#2874362    

I replaced the EGR valve on my 1992 K1500 5.7L and when I was putting the hose on the EGR valve, the other end of the hose pulled loose from the EGR solenoid, at which point I noticed that there are two hose nipples on the EGR valve side of the EGR solenoid, with the second one not having a hose on it. Should there be a hose on that second nipple and, if so, where does the other end of that hose attach? (With the EGR valve replaced, the truck is running much better, but the idle is still not perfect, so I am wondering if this un-hosed nipple has anything to do with it.)



 
someotherguy 
Senior Moderator
Posts: 29801
someotherguy
Loc: Texas
Reg: 08-01-03
10-02-24 06:05 AM - Post#2874368    
    In response to Caswell

Welcome,

There's 3 apparent ports on the EGR solenoid - but only 2 of them are actually hose connections. They're easily identified as they have barbs for retaining the hose boot. The smooth one is simply a vent and should be left open. Originally, they had small foam filters, but by now they're long gone.

Richard

06 Silverado ISS / 06 Silverado SS / 06 300C SRT8 / 93 C3500 dually


 
Caswell 
Newbie
Posts: 2

Reg: 10-01-24
10-02-24 06:59 AM - Post#2874369    
    In response to someotherguy

Great. Thanks for the reply, Richard!



 
Icon Legend Permissions Topic Options
Report Post

Quote Post

Quick Reply

Print Topic

Email Topic

1411 Views
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.324 seconds.   Total Queries: 16   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 05:01 PM
Top