Gain extra benefits by becoming a Supporting Member Click here find out how!

Classic Performance Products Nu-Relics Power Windows
American Auto Wire Hellwig Products IncPerformance Rod & Custom
Danchuk Catalog



Username Post: from a slight "charge' to "discharge" ? what's with this/        (Topic#375309)
matt49 
Member
Posts: 96

Reg: 05-26-05
07-09-24 04:25 PM - Post#2871620    

My stock '49 Chev 216 always showed a slight + on the amp gauge. Now it's a slight discharge, even at fast idle. Then when the head lights are turned on it's a MAJOR discharge. Checked the non-adjustable voltage regulator for contact point gap/cleanliness. Time to rebuild the generator? The generator has been untouched since '97. Battery is a couple years old, stored in winter, and cranks fine....but this draw is taking its toll. Any thoughts?
Regards and thanks from Matt



 


Shepherd 
Valued Contributor
Posts: 3439

Loc: Lake George, NY
Reg: 11-11-15
07-09-24 04:56 PM - Post#2871622    
    In response to matt49

To check generator output, momentarily ground the field terminal on the generator, engine at 1,500 rpms your volt meter on the battery terminals would be around 7.8-8.0 volts,this eliminates the regulator also. Post back results.



 
Doug52sedandelivery 
"4th Year" Gold Supporting Member
Posts: 45
Doug52sedandelivery
Age: 72
Loc: Eddyville KY
Reg: 01-22-20
07-11-24 03:24 AM - Post#2871660    
    In response to Shepherd

You might need to flash the generator as it may have lost its residual magnetism. I had to do this on my 35 ford. It got it charging again

Here is a link on how to do it. It is for a 12 volt system. Works the same just use your 6 volt battery

https://101generator.com/how-to-flash-a-genera tor/

Doug



 
bobt 
Contributor
Posts: 411

Loc: colonial heights va
Reg: 06-28-14
07-11-24 06:25 AM - Post#2871663    
    In response to Doug52sedandelivery

polarizing the voltage regulator is the same as flashing and all you need is a paperclip or a short piece of wire



 
matt49 
Member
Posts: 96

Reg: 05-26-05
07-11-24 06:39 PM - Post#2871675    
    In response to Shepherd

I took Shepherd's suggestion. At 1500 rpm I disconnected the FLD connector from the voltage regulator and grounded it. Battery voltage reading was 6.02 volts, which tells me Mr. Generator isn't doing his job.
Haven't tried "flashing" yet.
Battery has been slowly discharging the past couple weeks. Turning on the headlights pegs the amp gage on the discharge side. Regulator points are clean and gapped, no corrosion or broken windings. Connections are clean, tight and not broken. Belt is not loose. Generator has not been serviced since at least 1997 when I "rescued" my Fleetline.
Any additional thoughts before generator goes to surgery?
Thanks in advance.
Matt



 


Icon Legend Permissions Topic Options
Report Post

Quote Post

Quick Reply

Print Topic

Email Topic

697 Views
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.415 seconds.   Total Queries: 17   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 08:58 PM
Top