chlkorg
Poster
Posts: 79
Loc: Maryland
Reg: 01-24-17
|
08-19-22 09:03 PM - Post#2846166
I'm looking to add an RP (reduced pressure / HTE) paint gun to my tool kit. Are there any other "budget" guns similar to the Iwata AZ3HTE2 (1.3 / 1.4) that can be had for between $100-$200? Insight and options would be appreciated.
Ej
'65 Impala SS, 327/300/PG, Madeira Maroon/Black (still just getting started on stand-off resto) |
Edited by chlkorg on 08-19-22 09:04 PM. Reason for edit: No reason given.
|
|
chlkorg
Poster
Posts: 79
Loc: Maryland
Reg: 01-24-17
|
08-20-22 10:28 AM - Post#2846185
In response to chlkorg
I'd also be appreciative of any suggestions for an LVLP (1.3 - 1.5) in the <$150 range. Currently spraying a lot of parts and panels in a somewhat confined space and looking to keep overspray to a minimum.
Ej
'65 Impala SS, 327/300/PG, Madeira Maroon/Black (still just getting started on stand-off resto) |
|
blang88
Newbie
Posts: 13
Reg: 01-29-24
|
01-30-24 11:35 AM - Post#2866423
In response to chlkorg
Every manufacture should have a budget option, have you checked Devilbiss? Here's a good source to get some info https://www.autobody101.com/forums/viewtopic.php?f=3&t=27782
|
chlkorg
Poster
Posts: 79
Loc: Maryland
Reg: 01-24-17
|
01-30-24 04:34 PM - Post#2866427
In response to blang88
Was surprised to see a reply notification for this forgotten thread. Thanks!
Since it's already bumped...
I did get the Iwata/Air Gunsa AZ3HTE2 for top coats and picked up an LVLP R500 which handles the bull work of 1.5-2.0 tipped primer and surfacer duties (very low overspray and air consumption). These two guns have been a stellar combination providing very good results especially for a garage squirter like me who used exclusively a Binks #7 for the past 35 years.
Ej
'65 Impala SS, 327/300/PG, Madeira Maroon/Black (still just getting started on stand-off resto) |
Edited by chlkorg on 01-30-24 04:37 PM. Reason for edit: No reason given.
|
|