Gain extra benefits by becoming a Supporting Member Click here find out how!
Classic Performance Products Classic Parts
American Auto Wire Classic Industries
Chevs of the 40sDanchuk Catalog
Hellwig Products IncPerformance Rod & CustomEcklers AutoMotive
Nu-Relics Power WindowsRain Gear Wiper Systems
Impala Bob's Bob's Chevy Trucks Bob's Chevelle Parts Bob's Classic Chevy



Username Post: Electrical headache        (Topic#352146)
68ImpalaGal 
Poster
Posts: 1

Reg: 07-22-18
07-22-18 12:35 PM - Post#2740800    

Hi I’m new here and I am tired of beating my head up against the wall. I have read several forms and done a lot of research but still cannot figure out what is going on with my 68 impala. As far as I can figure it has to be some ground issue that I am not finding. When I turn my headlights on my gas gauge goes down, one turn signal light on the dashboard glows, the clock stops working. I don’t have bright tail lights on one side. (I’m currently working on changing the bulbs and cleaning up the sockets. The wire harness is new). My headlight switch is new. Can I get some advice on what else I should be looking at?



 




acardon 
Ultra Senior Member
Posts: 11099
acardon
Loc: DFW TEXAS
Reg: 03-25-05
07-22-18 12:53 PM - Post#2740802    
    In response to 68ImpalaGal

You are probably missing a ground strap on the instrument cluster. The gauges are mounted on a plastic housing and require a ground strap or wire, for the gauges, to the metal part of the dash.
Cleaning the sockets and making sure of a good ground for the sockets should fix the tail lights.

Don
66 Corvair (driving)
57 2dr HT (driving)
56 2dr HT (waiting to be restored)


 
PeteVS 
Poster
Posts: 9
PeteVS
Loc: 07932
Reg: 01-28-17
11-26-18 09:39 AM - Post#2752419    
    In response to 68ImpalaGal

The deal where tail lights aren't bright on one side... This is a fairly common situation and it often happens that when you step on the brakes, that side goes out altogether. This is caused by a no ground on that light socket. What happens is that when just the tail lights are on, that tail light will reach a ground on the other side by having current go through both brake light filaments and reaching the ground on the other side. When you step on the brakes, the brake light filament on the other side is made "hot" on the side that the current was coming to. So, the "dim" side now has no way of reaching ground and it goes out.



 




Icon Legend Permissions Topic Options
Report Post

Quote Post

Quick Reply

Print Topic

Email Topic

272 Views
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.34 seconds.   Total Queries: 17   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 02:05 AM
Top