Gain extra benefits by becoming a Supporting Member Click here find out how!

Classic Performance Products Nu-Relics Power Windows
American Auto Wire Hellwig Products IncPerformance Rod & Custom
Danchuk Catalog



Username Post: Smog delete/air flow overhaul in a '77 Wagon questions        (Topic#338658)
kingpenm3 
Forum Newbie
Posts: 2

Reg: 08-28-16
08-28-16 01:55 PM - Post#2648258    

I just got my hands on a sweet 77 Caprice Wagon! I'm trying to get a parts list together to tidy things up a bit. Looking for any and all advice I can get.

Here is what I know: The cold air intake is rotted out, oil is leaking from the passenger valve cover, the exhaust pipe from the cat to the muffler is rusted bad, and, to my surprise, the car has plenty of power for me.

Before I got the car my plan was to do a big cam and head swap to get some power, but I just can't believe how this big ole car can move as is! So now my plan is to just take care of the simpler swaps on the top and bottom of the engine. What I have in mind is to remove the smog pump and everything it is attached to and put these parts in:

Air cleaner and Edelbrock 1406 Carb
New valve covers
Flowtech Headers
Flowmaster scavenger Y pipe
Flowmaster series 40 muffler

Am I on the right track? Those parts make sense? Should those headers fit? It seems like a set of full size headers sure would sit low under the car. My plan is to just keep things single and have a local exhaust shop fab up all the connections. Thanks in advance for any input.

Pics of new ride:









 


VintageCarryall 
Valued Contributor
Posts: 2634

Loc: Arizona
Reg: 10-08-06
09-22-16 02:29 PM - Post#2652711    
    In response to kingpenm3

Assuming you have a Quadrajet 4 barrel carb; I'd leave everything on the engine box stock but, give it a sharp tuneup. If needed; rebuild your carb while you're in there.

Exhaust: headers don't do much unless you're going with a bigger cam, 2.02 heads, etc. If it were me, I'd leave the stock exhaust manifolds on there but install a highflow cat and muffler of your choice.

1994 Dodge Caravan SWB 3.3L V6
1962 Studebaker Lark 4 door 350 Chevy/TH350



 
Mercedes 
Contributor
Posts: 216

Reg: 07-09-18
11-28-20 09:42 AM - Post#2808843    
    In response to kingpenm3

Back in the late 80s, I had a 1977 Caprice with the 350 4-bbl. I rebuilt the carb and gave it a good tune up. At 170 HP, it really ran great and had all the power that I needed.





 
Stinky 
Senior Member
Posts: 1748

Loc: Whitewater, CO
Reg: 05-25-01
12-18-20 07:26 PM - Post#2810311    
    In response to Mercedes

Back around 80-84, my boss had a new Chevy PU and he complained about the lack of power. He had headers put on it and said that it made a big dif. I bet that truck lost the cat in the process.

That PU was a few years newer than yours and it was hit harder by smog stuff than yours...my point, that headers can make a big dif on something like your motor.

That said, I wouldn't put them on as they can be a pain on a daily driver...he had gasket problems. Cats on GM cars, of that vintage were very restrictive...a high flow cat would really help you out.

The only thing that I'd replace the Q.jet with is fuel injection (about 900 on Summitt, I Think, for a 2bbl set.up).

You need a cold.air intake. On my VW bus, w.a 20R in it, it made a difference of 4 mpg.



Edited by Stinky on 12-18-20 07:28 PM. Reason for edit: No reason given.

 


Icon Legend Permissions Topic Options
Report Post

Quote Post

Quick Reply

Print Topic

Email Topic

2820 Views
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.14 seconds.   Total Queries: 17   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 06:26 PM
Top