Gain extra benefits by becoming a Supporting Member Click here find out how!

Classic Performance Products Nu-Relics Power Windows
American Auto Wire Hellwig Products IncPerformance Rod & Custom
Danchuk Catalog



Username Post: V8 Vega Hates me        (Topic#361966)
Faulty Logic 
Newbie
Posts: 21

Age: 64
Loc: Cleveland,Ohio
Reg: 07-27-12
07-30-20 03:40 PM - Post#2799947    

Greetings all,my Vega stalls when I put it in gear?Stock motor,trans,convertor,vac uum advance is working.NEVER had trouble like this before.Anybody know whats wrong here?Thanks



 


bobb 
Super Senior Member
Posts: 5806

Loc: paradise
Reg: 09-05-03
08-02-20 09:03 AM - Post#2800140    
    In response to Faulty Logic

v8?

70 L camino, grampa engine, g-force 5 spd, road rage suspension. Pray first before all else fails.


 
Faulty Logic 
Newbie
Posts: 21

Age: 64
Loc: Cleveland,Ohio
Reg: 07-27-12
09-03-20 01:50 PM - Post#2802666    
    In response to bobb

Hello,yes I put in a V8 350 engine and 350 Turbo.When I start the car it runs fine.When I put the car in ANY gear WITH MY FOOT OFF THE BRAKE the wheels turn in both directions (REVERSE-DRIVE).As soon as I hit the brake,it stalls.Ive been told that maybe the trans is damaged internally and Drive and Reverse gears are Locked at the same time causing the problem.How could the trans function in BOTH DRIVE and REVERSE if that was the problem?Ever seen this problem before?What do you think?Thanks



 
wagonman100 
Site Ambassador
Posts: 15192

Loc: Baltimore, MD
Reg: 11-27-04
10-03-20 05:27 PM - Post#2804764    
    In response to Faulty Logic

Are you saying that with the rear wheels raised and the car in gear one wheel rotates forward and one rotates backward? If you don’t have a positraction rear, that is normal. As far as the stalling goes, you could have an internal leak in the brake booster. Try disconnecting and plugging the line going to the booster, start the car and apply the brakes and see if it still stalls. It would actually be best to plug the fitting in the manifold for the power brakes as the leak could be in the hose. But either way, the vacuum draw will not be increased by applying the brakes, so the engine shouldn’t stall from doing that.

Jay
Friends don’t let friends drive Fords.

1999 Silverado Z71 4X4 extra-cab short bed
1983 Malibu Fauxmad - tubbed
1978 El Camino Kustomized
1972 Monte Carlo
1957 210 handyman wagon
1957 Nomad sport wagon
1957 Cameo Carrier


 
56sedandelivery 
Gold Supporting Member
Posts: 5917
56sedandelivery
Age: 69
Loc: Everett, Wa.
Reg: 02-26-08
12-31-20 10:33 AM - Post#2811065    
    In response to wagonman100

There's actually a way to have an automatic transmission in both a forward AND reverse gear at the same time; it's called a trans-brake used for drag racing. It's used to lock the car on the start line, bring the engine speed up against the torque converter, and when the trans-brake switch is released, it's in low gear and reverse is "dumped". And off you go. Almost like dumping the clutch in a manual trans car. But, I don't think that's your probably as you probably don't have a trans-brake. As far as your issue goes, my guess is carburation VS timing VS vacuum or vacuum leak. If you're not sure about your trans, drop the pan and look for metalic particles or bits. If it's a NEW trans, maybe the sprag was put in backwards?
I am Butch/56sedandelivery.




 
Algoma56 
Contributor
Posts: 735

Loc: Sault Ste. Marie, ON, Can...
Reg: 03-14-05
06-15-21 06:20 AM - Post#2821624    
    In response to Faulty Logic

Do you have a Turbo 350 with lock up convertor? If the circuitry failed, then braking can cause it to stall. I know this has happened with the later transmissions with lockup systems.



 


Icon Legend Permissions Topic Options
Report Post

Quote Post

Quick Reply

Print Topic

Email Topic

2407 Views
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.006 seconds.   Total Queries: 10   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 11:58 PM
Top