Danchuk Catalog Classic Industries
American Auto Wire
Classic Performance Products
Hellwig Products IncPerformance Rod & CustomNu-Relics Power Windows




Username Post: Brake hose bracket
Bad56Sedan 
"14th Year" Gold Supporting Member
Posts: 1272
Bad56Sedan
Loc: Pasadena, Texas
Reg: 04-29-04
09-15-20 02:48 PM - Post#2803527    
    In response to 4dr 57

It's been 2 days and no one has answered,
Surly others have seen this before,
The issue is the thickness of the bracket is just enough so when the brake line fitting is in the bracket a clip is pushed in and it holds the fitting in place preventing rotation or back and forth movement of the brake hose assembly.
Short of replacing or weld repair then filing to fit, is it possible to use shim material of some thickness bent "u" shaped and put through the bracket then install the brake hose?
Would that be tight enough?
Seems most any thing you would try would be in the way, or is it make another bracket and bolt, to the old bracket? Maybe machine screws.
Not really sure what I would do, maybe make another bracket and weld or bolt to old bracket?
VC56S 2 door Sedan, 40 Years

[image]https://www.chevytalk.org/fusionbb/fbbavatars/a v-3564-1354211547.jpg[/image]

NOTE: You are viewing an individual Post. View the Entire Topic
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.096 seconds.   Total Queries: 12   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 09:37 AM
Top