American Auto Wire
Username Post: HEI UPGRADE
American Autowire "Site Sponsor"
Posts: 5150

Loc: Bellmawr, NJ
Reg: 09-11-06
12-02-18 11:11 PM - Post#2753144    
    In response to R8ROB

  • R8ROB Said:
Good morning I recently switched to hei on my 65 2dr ht. I have a pink wire that was going to the coil. Will that now be my power wire going to the HEI distributor? When key switch is in the off position it shows 1.2 VDC and when the ignition is turned on it shows 0.0 VDC on meter. I recently upgraded to AAW 510360 classic updated kit.

The pink wire in the engine harness that says 12v ignition is the feed to the "batt" on the hei distributor. Should have a a full 12 volts with the key in the "on" postion. What did you have in the car before and how did you have it hooked up?


NOTE: You are viewing an individual Post. View the Entire Topic
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.158 seconds.   Total Queries: 12   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 09:52 AM