Gain extra benefits by becoming a Supporting Member Click here find out how!

Classic Performance Products Classic Parts
American Auto Wire Classic Industries
Danchuk Catalog
Hellwig Products IncPerformance Rod & CustomJoin the Community today
Ecklers AutoMotiveNu-Relics Power Windows





Username Post: Selecting a stock-ish in-tank pump
cloudmaster 
Senior Member
Posts: 1008
cloudmaster
Loc: Arrowsmith, IL
Reg: 01-30-02
06-05-18 05:07 PM - Post#2736073    
    In response to Rick_L

Looks like around 11 amps tops for the Walboro, and I assume similar for the Aeromotive (since it's supposed to be a "stealth stock replacement"). At 14.4 volts, that means surprisingly tiny little 20 gauge would just barely be able to maintain 12 volts at the pump ten feet away - though you'd justifiably get some sideways glances if you did that. I ran 14 gauge off an individually-fused relay when I rewired everything (technically just "wired", since there was no pump there stock), so that part should be ok.
'71 Malibu: 350/200-4R/3.73 Eaton posi
'75 Elky: 350HO/TH350/3.42 peg leg
'85 C20: EFI454/TH400/3.73 locker
'95 Caprice Wagon: LT1/4L60E/3.42 posi
'04 Grand Marquis: 2V4.6/3" pipes/SCT flash

NOTE: You are viewing an individual Post. View the Entire Topic
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.06 seconds.   Total Queries: 13   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 01:54 AM
Top