01-07-21 02:00 PM - Post#2811589 In response to Russ
You don't need an extra seal. The outside of the bearing has a seal and the o-ring should come withe the bearing.
The retainer has a gasket but is not sealed to the axle. If the bearing should leak, the retainer has a indention to allow grease to go through a hole in the backing plate and not get on the brake shoes.
Don
66 Corvair (driving)
57 2dr HT (driving)
56 2dr HT (waiting to be restored)
Gain extra benefits by becoming a Supporting Member 
