Gain extra benefits by becoming a Supporting Member Click here find out how!

Classic Performance Products Classic Parts
American Auto Wire Classic Industries
Danchuk Catalog
Hellwig Products IncPerformance Rod & CustomNu-Relics Power Windows



Username Post: powerglide yoke binding on splines
56driver 
"2nd Year" Gold Supporting Member
Posts: 340
56driver
Loc: Charlotte, NC
Reg: 02-26-06
08-04-19 02:23 PM - Post#2772406    

Strange problem with a stock 56 Powerglide. The original (I think) 16-spline slip yoke bound on the splines, had to be hammered on.

I bought a used one from Eckler's, same problem. Definitely binding on the splines, not the yoke OD, won't go on more than 1".

Pretty sure the binding is between the major diameter of the yoke splines and the OD of the tail shaft splines.

The yoke spline major diameter is about 1.172" measured with cheap dial calipers, which matches about nominal advertised for a new yoke.

As best I can tell the tail shaft splines are around 1.175" - 1.178". I can't see any obvious spline twist, bend, or corrosion.

So I either have two undersized yokes or an oversized tail shaft?
Jonathan Hines
Charlotte, NC
56 BA 4DR sedan undergoing rebuild

NOTE: You are viewing an individual Post. View the Entire Topic
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.115 seconds.   Total Queries: 13   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 12:26 AM
Top