Danchuk Catalog Classic Industries
American Auto Wire
Classic Performance Products
Hellwig Products IncPerformance Rod & CustomNu-Relics Power Windows




Username Post: 55 Sport Coupe - 396 LT1 - T56
2Loose 
"16th Year" Platinum Supporting Member
Posts: 4470
2Loose
Age: 78
Loc: Sandwich Isles
Reg: 03-17-03
06-15-19 12:31 PM - Post#2768511    
    In response to 2Loose

Dug out my valve spring compression gage....



....And used it to press against the clutch pedal,
it's running between 35 and 45 lbs pressure, so I'll use 40 average,
with this system I designed the mechanical leverage factor
is 5.5 to 1, so with 40 lbs at the pedal I'm putting 220 lbs
on the clutch release lever at the slave cylinder...
For this aftermarket '93 LT1 T56 clutch setup I
don know if that is excessive or not. It sure feels like
a lot though....



But I've decided to just leave it and drive it this way and see how it feels...
I still need to setup an adjustable "stop" and install the over-center return
spring on the clutch pedal, and then see how that feels....
More later,
Willy
NOTE: You are viewing an individual Post. View the Entire Topic
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.067 seconds.   Total Queries: 12   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 06:09 AM
Top