Select "print" from your browser's "File" menu.

Back to Post
Username Post: Nomad rear drip rail
dhaes
"2nd Year" Silver Supporting Member
Posts 14
dhaes
01-29-21 12:59 PM - Post#2813207    

Do any of you know if the screw-on rear drip rail above the lift gate is reproduced and for sale by anybody?
dhaes
"2nd Year" Silver Supporting Member
Posts 14
dhaes
02-09-21 03:01 PM - Post#2813962    

After looking at a bunch of Nomad pictures, I didn't find any that had the drip rail I am questioning. Even my other "parts" Nomad doesn't have it (and never did).

Is this a rare part or are people just removing them because they are damaged and not reproduced?
55MAS
Senior Member
Posts 1553
02-10-21 02:58 AM - Post#2813989    

Post some pictures of what you are talking about.

wagonman100
Site Ambassador
Posts 15010
02-10-21 07:47 PM - Post#2814065    

As far as I know the only drip rail at the rear is the one that is part of the lift gate. The lift gate is chrome and I believe the drip rail got painted body color. These gates are notorious for leaking, so maybe someone fabricated something to try to divert the water before it got to the lift gate opening. What was the drip rail screwed to?
Jay
Friends don’t let friends drive Fords.

1999 Silverado Z71 4X4 extra-cab short bed
1983 Malibu Fauxmad - tubbed
1978 El Camino Kustomized
1972 Monte Carlo
1957 210 handyman wagon
1957 Nomad sport wagon
1957 Cameo Carrier

dhaes
"2nd Year" Silver Supporting Member
Posts 14
dhaes
02-13-21 10:54 AM - Post#2814217    



Attachment: 20210208_123753__2_.jpg (474.84 KB) 3 Views
Attachment: 20210208_123635__2_.jpg (419.91 KB) 3 Views
Attachment: 20210208_123710__2_.jpg (1.03 MB) 5 Views


55MAS
Senior Member
Posts 1553
02-13-21 04:52 PM - Post#2814229    

Interesting. That is not factory. It appears to be something a previous owner made or hade made to deal with the typical rear gate leaks due tp seal failure. Is the gate upper horizontal rail gutter altered/removed? Post some pics if it is. Do you have any pics with the gate installed?

dhaes
"2nd Year" Silver Supporting Member
Posts 14
dhaes
02-15-21 12:45 PM - Post#2814296    

I haven't had the lift gate on the car yet but it does have an unmodified drip rail. I did hold it up to the body and can see that it will clear the roof mounted drip rail.

It appears to be a stamped steel product professionally created and not somebody's one off creation.

I sort of like it since it would help the leak problems and that it might be some rare accessory. I'm just not sure it worth repairing the minor rust issues (it seems like I have replaced/repaired 75% of the sheet metal on the car already).
55MAS
Senior Member
Posts 1553
02-15-21 01:48 PM - Post#2814306    

  • dhaes Said:
I haven't had the lift gate on the car yet but it does have an unmodified drip rail. I did hold it up to the body and can see that it will clear the roof mounted drip rail.

It appears to be a stamped steel product professionally created and not somebody's one off creation.

I sort of like it since it would help the leak problems and that it might be some rare accessory. I'm just not sure it worth repairing the minor rust issues (it seems like I have replaced/repaired 75% of the sheet metal on the car already).



I guess you have not seen the kind of wonders talented sheet metal crafters can make even by hand. Not an accessory from GM, otherwise there would be considerably more that your single example.

Note that it will hold water since there is no apparent drain(s). Are there drains that are not obvious in the photos?





dhaes
"2nd Year" Silver Supporting Member
Posts 14
dhaes
02-16-21 02:35 PM - Post#2814408    

No drains. I'll probably just remove it.
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.141 seconds.   Total Queries: 15   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 11:17 PM
Top