Select "print" from your browser's "File" menu.

Back to Post
Username Post: DOES A NEW CLUTCH HAVE TO BE DIALED IN WITH AN INDICATOR?
1980 MALIBU 406 CU. IN.
Forum Newbie
Posts 11
03-29-17 05:29 PM - Post#2684092    

I have a small vibration in my floor shifter at higher Rpm's.
DOES THE CLUTCH HAVE TO BE DIALED IN WITH A DIAL INDICATER WHEN INSTALLED WITH THE BOLTS STILL LOOSE?
THERE DOES NOT SEEM TO BE MUCH PLAY IF ANY IN THE BOLT HOLES WHEN ALL 6 BOLTS ARE IN PLACE, AND IS THERE A GOOD PLACE TO SET THE DIAL INDICATOR POINTER ON THE CENTER FORCE DUAL FRICTION PRESSURE PLATE WHILE DOING THIS?
EVERYTHING IN MY MALIBU IS NEW OR REBUILT INCLUDING A NEW DRIVESHAFT (SPUN BALANCED AT HIGH RPM, TWICE!)AND THE MUCCI M22 ROCK CRUSHER TRANY HAD ALL NEW BEARINGS AND SEALS INSTALLED SO IT NOW LEADS ME TO THE CLUTCH/DISC/FLYWHEEL ASSEMBLY.
raycow
DECEASED
Posts 27999
raycow
03-31-17 08:25 PM - Post#2684439    

I have never heard of a pressure plate needing to be dialed in. Sometimes a bellhousing needs to be dialed in, but that's a whole different story.

Ray
Those who choose an automatic transmission want transportation. Those who choose a manual transmission want to drive.

FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.055 seconds.   Total Queries: 14   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 08:22 AM
Top