Gain extra benefits by becoming a Supporting Member Click here find out how!
Classic Performance Products Classic Parts
Ciadella InteriorsAmerican Auto Wire Classic Industries
Chevs of the 40sDanchuk Catalog
Hellwig Products IncPerformance Rod & CustomEcklers AutoMotive
Nu-Relics Power Windows
Impala Bob's Bob's Chevy Trucks Bob's Chevelle Parts Bob's Classic Chevy

Username Post: 350 TBI Distributor Leak        (Topic#348811)
Jeffrey0180 
Forum Newbie
Posts: 32

Age: 18
Loc: The Netherlands
Reg: 12-22-17
12-22-17 01:19 AM - Post#2718738    

Hey everyone,

I am the owner of a 94' C1500 with a 350 TBI engine.

I have a big oil leak on top of my intake manifold, behind the air filter. I suspect its coming from either the OPS or the Distributor.

Does the distributor have an O-Ring AND a paper gasket between the manifold and the Distr. or only an O-ring?



 




junkman104 
Frequent Contributor
Posts: 1194
junkman104
Age: 59
Loc: Murphy N.C.
Reg: 01-25-14
12-22-17 06:12 AM - Post#2718745    
    In response to Jeffrey0180

More than likely the intake needs to be resealed. The front and rear of it is sealed with black RVT.



 
jktucker92 
Silver Supporting Member
Posts: 185
jktucker92
Reg: 02-05-17
12-22-17 11:47 AM - Post#2718781    
    In response to junkman104

Your post states that the oil leak is on top of the intake manifold, behind the air filter. The distributor uses a paper gasket only, but I've never seen a significant leak there because there's not a lot to force oil out that seal. If your engine is worn out (blowby), and the PCV valve is plugged, then there might be some pressure there forcing oil out. Another possibility is the oil breather tube that typically goes from the valve cover to the spacer between the air filter and TBI. Again, if there's a lot of blowby, the oil can get forced into that tube and leak out. If the PCV valve is working properly, there shouldn't be much pressure there. You can check for blowby pressure by removing the oil filler cap and feeling for air movement out the filler with the engine running.
The more common oil leak, as Junkman104 mentioned, is the intake manifold gasket at the back of the engine. Air currents can drive oil up from that gasket and make it look like the leak is on top of the manifold, so check for excessive oil on top of the bellhousing first before you investigate other possibilities.



 




Icon Legend Permissions Topic Options
Report Post

Quote Post

Quick Reply

Print Topic

Email Topic

712 Views
FusionBB
FusionBB™ Version 2.1
©2003-2006 InteractivePHP, Inc.
Execution time: 0.382 seconds.   Total Queries: 17   Zlib Compression is on.
All times are (GMT -0800) Pacific. Current time is 02:05 PM
Top