ElvisChevy51
Forum Newbie
Posts: 3
Age: 30
Loc: Nottingham, UK
Reg: 05-17-15
|
11-12-17 01:57 PM - Post#2714170
I’m desperately trying to find a section of the drivers side rear quarter surrounding the tail light for a 51 Chevrolet styleline.
Being in the UK and the fact that you can only buy the lower section of the 1/4 panel means sourcing this part is proving to be a bit of a challenge.
I wonder if any of you can advise on some decent salvage yards I could contact to try and hunt down this part? Telephone numbers and email addresses would be great, and better still a location so I can work out time difference before I call!
Any help will be much appreciated, so thank you in advance!
|
|
 Keith_Knox
Moderator and "16th Year" Gold Supporting Member
Posts: 5808
Age: 76
Loc: Napa, Ca USA
Reg: 04-02-00
|
11-15-17 10:30 AM - Post#2714486
In response to ElvisChevy51
http://owenssalvage.com/ Wellington TX 800-798-2581 Several guys have bought from him.
http://www.wollerautoparts.com/ 1/14/17 Don’t know much about them. Colorado
https://www.dvap.com/ Desert Valley Auto Parts. Arizona
Good luck on your quest.
1948 Chevy Fleetmaster Coupe Purchased 6/2010. Stock with rebuilt 52 216 installed May 1966.
1946 Chevy 1/2 ton pickup, stock. Purchased 11/18/17.
1962 Ranchero Purchased 4/2017 221 V8 Automatic.
2013 F150 Crew Cab |
|
 cbmkr56
Silver Supporting Member
Posts: 1030
Age: 62
Loc: Basehor Ks
Reg: 02-11-13
|
11-21-17 11:43 AM - Post#2715201
In response to ElvisChevy51
PM me a picture of the area you need , I can probably find a good one.
|
fiftychev
Member
Posts: 145
Reg: 09-06-04
|
01-02-18 04:28 PM - Post#2719806
In response to ElvisChevy51
Try this one.
http://www.windyhillautoparts.com/
They are in Minnesota. They have quite a few old Chevys. If they won't ship, let me know and I can go get it and ship it to you.
|
 drew1987
"5th Year" Silver Supporting Member
Posts: 3005
Age: 30
Loc: Rochester, New York
Reg: 02-23-14
|
01-07-18 05:37 PM - Post#2720373
In response to fiftychev
You might also reach out to 40grit he’s got photos of when he made his own! Made a template and fabricated it.
|
|
Gain extra benefits by becoming a Supporting Member 
