Dad
Forum Newbie
Posts: 35
Age: 62
Loc: Jefferson City mo,
Reg: 02-14-12
|
02-21-12 10:10 PM - Post#2193653
In response to grumpyvette
Thanks for the info Grumpy. It made for some really good reading and lots of good info as well. I have built several small blocks throughout the years but only a few big ones, and what you have posted tought me alot about them I was unaware of, most of all oiling. With your info, I have decided to go with a 496 rotating assembly. For the money , it is the best value and I know going in that all will work out for the best. Still thinking of the blower though. The Cam, I will have to talk to one of the cam makers in order to get the right combo there. I have talked to others and by far you gave me the better info. Thanks again, Dad
|
Gain extra benefits by becoming a Supporting Member 
drtyler (4)
